8 WATT MR16 TYPE EXN DIMMABLE LED LIGHT BULB WITH 50K DAYLIGHT WHITE COLOR TONE IS IDEAL REPLACEMENT FOR 50 WATT HALOGEN MR16 BULBS - PLEASE SEE BELOW FOR TRANSFORMER COMPATIBILITY -
- Uses only 8 watts energy
- Maintaines 80% of brightness for 40,000 hours and lasts up to 60,000 hours
- Ideal replacement for 50 watt MR16 halogen light bulbs
- Withstands voltage variances and surges from 10 - 16 volts
- 5 year commercial/industrial factory warranty
Bulborama LED light bulbs offer the most energy saving and efficient lighting technology in the marketplace. By utilizing prorietary Cree chips, our LED bulbs maintain brightness levels longer and withstand voltage variations to ensure superior operating efficiency. With lifespans up to 70,000 hours, cool operating temperatures, and unmatched energy savings, LED's are ideal directional lighting replacements for track lighting, accent lights, recessed cans, ceiling lights, or security lighting.
Bulborama LED bulbs are available in various color temperatures and low profile sizes to fit a wide variety of fixtures. By changing incandescent or halogen bulbs to LED, you immediately realize up to 95% energy cost savings and years of maintenance free operation.
Consider the following when selecting transformers for use with 12 volt MR16 LED bulbs:
May not be compatible with all dimming systems. Dimming performance may vary by system. Magnetic transformers are recommended for dimming applications. Use on incompatible systems may shorten lamp life. Lamps should be tested in the application prior to full installation on circuits using such devices.
Transformer/Power Supply Compatibility
MR16 Low Voltage LED Bulbs are compatible with nearly all Magnetic Transformers/Power Supplies. However, many Electronic Transformers/Power Supplies (especially older installed versions) may not be compatible. The reason is Electronic Transformers require a minimum load, which is in most instances is greater than that of the energy efficient LED bulbs.
As a result, LED 12 volt MR16 bulbs will not work well with Electronic Transformers. The most common results are Flickering, Strobe Effect and in many cases No Light at all. The solution is simple. Replace the Electronic Transformer/Power Supply with a Magnetic version.
- AC12V Magnetic Transformer:
The LED bulb is compatible with magnetic transformers used with 12V halogens; however, magnetic transformers are heavier, less efficient, and make noise. Under 12VAC condition, series MR16 LED can only present 90% lighting comparing the condition under 12VDC.
- AC12V Electronic Transformer:
The LED bulb is not compatible with electronic transformers or electronic-magnetic AC12V due to the output section of this kind of transformers are not stable. Besides, some electronic transformers require a minimum load higher than 5-10 watts in order to work properly. Symptoms of incompatibility include: no light output, flickering, strobe and randomly shutdown.
- DC12V Power Supply:
MR16 can perform highest brightness and power efficiency under DC12V power supply.